Star Wars Neon Line Art - Y-Wing

Slow? Maybe. Powerful? Absolutely. ⚡🚀

This latest glowing design is a tribute to one of the most underrated workhorses of the Rebellion—the Y-Wing Starfighter. Known for its durability and heavy payload, this bomber was the backbone of countless space battles.

By day, the crisp, clean lines make for a sleek, tactical display. But in the dark, the neon glow gives it a heads-up display feel, like something straight out of a Rebel pilot's cockpit.

Who else loves the Y-Wing? Let me know if you’d like to see more Rebel ships in this style! ⚔✨

🎨 These are the filaments I've used

• Bambu Lab Basic PLA Black
• Bambu Lab Basic PLA Glow

Print and assembly instructions

Geometric Art

• 0.20 layer height
• Wall Generator: Arachne
• Top surface pattern: Monotonic
• Infill: 15%
• Color change at layer 21 (4.20mm)

Frame

• Wall Generator: Arachne (otherwise the chances of the print-in-place latches fusing to the frame are higher)
• Infill: 15%
• To loosen the latches move them up a bit before turning them
• Use the latches to secure the artwork into the frame (TIP: add a strip of tape to the back of the artwork where the latch will hold if the latch is too loose)
• When you use the wall hook, make sure you turn the latch under the hook to the locked position before installing the wall hook. Slide the artwork under the locked latch first, position it into the frame and close all other latches

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Seller subscription.