Ms. Pac-Man 3D Logo

My sister loves Ms. Pac-Man so I made her a 3D printed logo.

This print is made up of multiple parts to show depth and different textures. Each STL file is labeled by color. I also included STL files labeled Face Down or Face Up depending on the print surface you are using. 

I printed the Yellow STL and the Pink STL face down on a texture powder coated sheet. Be careful with the yellow STL, the dash between Pac-Man is small, it can get knocked off the print surface if it isn't cleaned properly. I printed the Pink Detail STL on a smooth sheet for best adhesion. Add some glue when assembling.

Share a picture if you print one!