Here is the PrusaSlicer version I used on my Prusa MK4S with MMU3. You can use the recommended 3MF or STL with the manual print instructions below.
Manual print instructions
- 100% infill
- Layer height: 0.08mm
- First layer height: 0.16mm
- Ironing: 15%
Filaments Used
- Polymaker PolyTerra PLA Black
- Polymaker PolyTerra PLA Orange
- Polymaker PolyTerra PLA Cotton White
Swap Instructions
- Start with Black
- At layer #5 (0.88mm) swap to Red
- At layer #13 (1.12mm) swap to Grey
- At layer #18 (1.52mm) swap to White for the rest.
License:
Creative Commons — Attribution — Noncommercial
Deimosfr
