The Owl House Noceda House

This is a model of the Noceda house from The Owl House.

I could only find pictures of the front, so I made the rest up.

The house and the ground around it are printed seperately (if you want to, you can just print the house).

Print Instructions

The house was printed at 0.7mm layer height. No supports needed. You should reduce the speed for the topmost levels.

The ground was printed at 0.15mm layer height. Ironing recommended. Includes two filament changes.

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#