CALIZ | Woven Table Lamp E14 & E26/27

CALIZ | Woven Table Lamp E14 & E26/27

A table lamp that works great with large "Edison filament" light bulbs.

This lamp is also available in taller version.

UPDATE:
You can now pick between 3 patterns for the base:
- Rock pattern (the original one)
- Wood pattern
- and Plain (which you can print as is or with a little bit of fuzzy skin)

It works with E14 &E26/27 light bulbs.
There's a version of the base for each type.

To add some weight to the base, you can fill-up the screw-in container with clay, gravel or sand, and screw it inside the bottom of the base.
It makes the lamp very stable, gives it a more premium feel.

The woven pattern (printed here in PETG) diffuses the light beautifully.
It can be printed by any printer with a classic 0.4mm nozzle.

Happy printing!

DIMENSIONS (shade) Ø190mm H 209mm

DIMENSIONS (base) Ø116mm H 116mm

3D printing settings

All STL files are already oriented properly.
You need to print 4 parts:
- one shade
- one base
- one weight container made of 2 parts

THE SHADE:
The shade prints upright.
Layer height: 0.3 mm (no less, no more)
Line width: 0.5mm (for a 0.4mm nozzle, so as to extrude a bit more material and achieve a cleaner weave)
Wall line count (perimeter walls): 2
Build adhesion type: None
Supports: None

For Bambu Studio users, make sure to:
- turn OFF "slow down for overhangs"
- set "wall generator" to "arachne".
- turn off the "scarf mode" in the seam settings.

THE BASE & WEIGHT CONTAINER:
No particular tricks for the base.
I used 0.2mm per layer and 15% infill.

Happy printing!