Sword of Sir Valentine - Kingdom Come

This is a digital 3D printable model of the Sword of Sir Valentine inspired by Kingdom Come. (Fan-made, unofficial, non-commercial artwork.)

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time.

Reinforcement of the sword:
• 1x rod with a diameter of 1 cm and a length of 41 cm
• 2x rods with a diameter of 6 mm and a length of 44 cm

SIZE
Width 192 mm
Length 34 mm
Height 889 mm
You can scale the model as you wish but we can’t guarantee that at a much smaller size, the model will print well.

✨ Check out Medieval Longsword from Kingdom Come ✨ printed by Prusa Guy on YouTube

3D PRINTING SETTINGS
We use these settings for most of our prints:
- Layer height 0.15 mm
- Infill 15%
- Supports 40°
- 8mm brim for better bed adhesion.

Printing settings will vary greatly depending on your specific printer.


This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here