Brush Holder v2

For 4 years I have been using my old design, but there were down sides to it. I searched 5 different 3D model sites for better brush holder, and even that there are few really nice ones, they all seem to be very congested, meaning brushes are too close to each other and therefor hard to use.

I numbered each slot and you can change (in BambuStudio) the numbers according to your brush selection by choosing ‘objects’ and then selecting what you want to change and then on prepare tab select ‘Text shape’ from icons on top and change the numbering.

You can also either print with two colors or painting the numbers with paint. Printing with two colors takes about 25 grams of extra filament.

You can fit brushes which has maximum of 7mm thickness at the 4cm from the bottom of the brush.