Motorcycle Shift Lever Cover - Shifter Cover - Shoe Saver

Motorcycle Shift Lever Cover - Shifter Cover - Shoe Saver

I ride motorcycle daily to work, weather permitting. I am sick of my shifter putting marks on my shoes! I purchased a shifter cover online, but when I got it, it didn't fit my shifter. Instead of continuing to order other ones to find one that fit, I just modeled this one up in Fusion.

This one is designed to fit the shifter on my 2017 Yamaha FZ-09, but I'm sure would fit a Ton of other bikes. It is 47mm long and tapers from 19mm at the tip to 22mm at the lever.

I'm also including the Fusion file so you can make changes to fit your motorcycle. The model is not parametric, but you can just edit the diameter in the first two sketches (steps 1 and 3), and the height of the offset plane (step two) to match your shift lever. 

The original model was a bit tight going on, so in V2 I made the hole just a little bit bigger. It still has a lip to hold it on, just not as large as the first version.

Printing:

TPU obviously.

No supports

Infill doesn't matter as it's mostly perimeters.

Happy motoring!