May 12, 2025
Description
This is a digital 3D printable model of Baylan Skoll's armor from the Ahsoka Series.
The download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time. The parts are connected via pins that can also be printed. This 3D model is meant to be used as a wearable cosplay armor.
SIZE
At 100% scale, the shoulder’s dimensions are approximately:
Width 140 mm
Length 170 mm
Height 200 mm
At 100% scale, the arm cover’s dimensions are approximately:
Width 120 mm
Length 220 mm
Height 120 mm
You can scale the model according to your measurements.
3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.15 mm
Infill 15%
Supports 45°
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.
We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.
Printing settings will vary greatly depending on your specific printer.
Do you like the model but don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links
License:
Commercial Use - No Derivative
3Demon
