February 5, 2022
Description
Big Balloon Boat, Small Boat, Big Boat and 2x2 Base compatible with big building bricks blocks e.g. LEGO DUPLO
If you like it --> press like it :-)
Would be happy to see your makes!
Remix of my balloon boat for small bricks, you can also take a look there and have fun with it ;-)
Printer Brand: Creality
Printer: CR10-V2
Rafts: Brim
Supports: No
Resolution: 0.2
Infill: 10 %
Printed: PETG/PLA
Filament change at 13,8mm (Samples on pics from balloon boat)
Balloon Boat
Weight: approx. 94g (at 4 wall lines)
Filament length: approx. 32m
Small Boat
Weight: approx. 39g (at 4 wall lines)
Filament length: approx. 13m
Big Boat
Weight: approx. 81g (at 4 wall lines)
Filament length: approx. 28m
2x2 Base (to check assembly with big bricks and adjustment of print parameters or as extension if one part goes over the size of your ground plate, that it is on the same height)
Weight: approx. 3g (at 4 wall lines)
Filament length: approx. 1m
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Crazy3D
