June 17, 2025
Description
If you're interested in the commercial use of my models, or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you. Thank you!
All my photos are REAL and show an actual 3D-printed figure photographed by me.
[ Suggested Print Setup ]
Nozzle: 0.4mm
Layer Height: 0.2mm
Infill: 5%
Wall loops: 3
Supports: Tree (auto)
Printed with: BambuLab PLA Matte Charcoal
Printed with fuzzy skin effect.
Fuzzy Skin: Contour
Fuzzy Skin Point Distance: 0.25
Fuzzy Skin thickness: 0.25
As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.
License:
Standard Digital File License
29flo
