1.3" OLED Display easy mounting frame

This is a mounting frame for a 1.3 Inch OLED Display 128x64, based on SH1106. It is designed
for easy use in any housing Project. You only have to cut a rectangle with 36x26mm into
the front Panel where you want to use it. You can create a strong fit (press fit) or use
a little bit glue for the frame. Cut M3 threads into the 4 holes or use self cutting screws.
 

Printing: PLA or your prefered material
Nozzle: 0.4
Infill: 20%
Support: yes, on bottom side