KPop Demon Hunters - Poster

If you want to sell prints of this model, as well as all of my models - future and past

                                                         Subscribe to My Patreon

This poster was requested by my girlfriend and I had to oblige! It turned out absolutely lovely. The pictures do not showcase it as well but it has an its own purple frame. 

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Jayo Black Transmission Distance: 0.3 / Amazon
PLA BambuLab Indigo Purple Transmission Distance: 0.8
PLA KINGROON Sky Blue Transmission Distance: 2.6 / Amazon
PLA Jayo Pink HS Transmission Distance: 4.8 / Amazon
PLA Jayo Matte White Transmission Distance: 4.2 / Amazon
PLA EryOne Mango Yellow Transmission Distance: 4.8 / Amazon

Color Pallete:

Swap Instructions:
Start with Black
    At layer #14 (1.2mm) swap to Indigo Purple
    At layer #19 (1.6mm) swap to Sky Blue
    At layer #23 (1.92mm) swap to Pink HS
    At layer #33 (2.72mm) swap to Matte White 
    At layer #40 (3.28mm) swap to Mango Yellow for the rest.

Drop me a follow!🤜🤛