July 2, 2025
Description
A mount matching the Ingco Cordless Brushless Drill for Multiboard. I used T-bolts to mount it but any type of small bolts could do the job.
Print settings:
- No supports needed (or maybe just organic/tree supports for the mounting holes)
- Any nozzle size could do, but I used 0.4mm
- Any layer size could work, but I used 0.25mm
- 3 perimeters and 20% infill seem to hold just fine
- I suggest you print in the orientation in which the file is already set, for more strength.
- Any non-flexible popular filament type should work (e.g PLA, PETG, ABS, ASA)
License:
Creative Commons — Attribution — Noncommercial — Share Alike
10
Stefan
