Supported phone and handlebar sizes:
- Vertical height: 145-165 mm (asymmetrical fit)
- Horizontal width: 70-80 mm (centered and asymmetrical supported)
- Thickness: 10 mm (contact me for other sizes)
- Handlebar diameter: 18-36 mm
Printing parameters phone holders:
- Material: PLA/PETG
- Resolution: 0.2 mm
- Perimeters: 4
- Infill: 15 %
- Supports: yes
- Brim: recommended
Printing parameters handlebar rings:
- Material: FLEX/TPU
- Resolution: 0.2 mm
- Perimeters: 2
- Infill: 50 %
- Print it twice
Assembly:
- Fix the horizontal holder in place using superglue
- Use 2 M4x20 bolts and 2 M4 locknuts
PointNemo
