Giant Brick Millennium Falcon

These are the print files so that you can print and build your own Simplified Millennium Falcon “Brick” set! 

I've included a .3mf file that I used to organize all of the print files by plate/color and scaled mine up to 400% of the original part size. 

The original .stl files are also included but will need to be scaled

Some parts do require supports but most can be printed without supports

I do recommend using Mouse Ear Brims!

I printed all of my parts at .28 layer height

5 top/3 bottom

10% infill / adaptive cubic

You can find a full breakdown of the build here

I will also be uploading assembly instructions

https://www.mecabricks.com/en/models/qxv4rGlV2dJ you can view this to see where each brick goes