Camera Mount for Prusa Mk3 and Mk2

Instructions:

• The Bed Camera Mount for Chain is very close to the bed and needs to be printed in something more heat resistant than PLA. Even PETG might bend, I use PC.
• Use screws from the Prusa spares bag if you have one, otherwise any M3-screws should work. Needs a square nut though. (Sorry for the inconsistent screw scheme, the mount is something I originally designed years ago…)
• The camera housing has three versions:
  1. Modelled M3 threads
  2. M3 DIN 562 square nut (from prusa spares bag)
  3. M3 thread insert.
• This is the camera, https://www.aliexpress.com/item/1005007989879227.html (not terrible, not great)
• The cable chain by Scops Owl Designs https://www.printables.com/model/314922-printable-cable-chain , thanks for a great design!
• The cable chain needs to be scaled down to 80% to fit this project