February 22, 2022
Description
I designed this unit to bring together the power supplies I need for my 3D Printer enclosure. The unit houses a 12v LED transformer, a buck converter to step down to 5v from the LED transformer for the RPi, and a mains output to drive the printer.
There are four components: Unit, Lid, Cable Trap 1 and Cable Trap 2.
The unit can be fixed to a surface using the internal screw holes and the lid is secured with two self tapping screws. The Cable Traps are also attached with self tapping screws.
Although this is a bespoke design for my enclosure, it may be useful to others with a similar setup.
License:
Creative Commons — Attribution
9
asteven5
