Modular round spice rack wall mount (parametrized)

I paramatrized this model to make it fully accessible to all round spice containers, preferences and printer clearances. As uploaded it is meant to fit for empty Barilla Pesto glasses which I used. To modify it for you own needs you just need a free OnShape Account to create a copy of this linked model and change the parameters in the variable table (see picture).

On the left side in the model you can also vary screw hole diameter if you need to.

https://cad.onshape.com/documents/6f11b0c0b86447603679b7de/w/dfc2885996b6ba6febae2da8/e/cff589f0e901a033c73b7ec3?renderMode=0&uiState=68ab0c4f5a16b33286fec0df

This document includes all parts (left end cap, middle and right end cap) and also an assembly where you can check if everything still fits assembled after configuring new parameters (don't forget to modify the variables of all 3 versions if you use all of them!). 

You don't need to mount every module to hold it on the wall. I used 4 screws to hold securely a set of 10 modular spice holders.

Printed in PLA on my CoreOne, supports on build plate only, 10% cubic infill.