February 26, 2022
Description
This is a cover for the AC side of the Meanwell USA SE-600-12 power supply. It's a decent supply. The 120v/240v side should be covered for safety. The 12v side does not pose a shock risk and is left open. This cover leaves the fan vent open. The screws used are metric M3.
The holes were not put into the 3d model. You will have to mark and drill them.
The socket, switch, and fuse combo was sourced from aliexpress, q: "power socket 10A"
Category: 3D Printer AccessoriesLicense:
Creative Commons — Attribution
7
Jesse
