PrintABlok Chess

Build Chess with PrintABlok. Comes with drawers for keeping your pieces in.

You will need:

• About 70 102h_Connectors
• 32 102st Slip Connector tighter
• 64 108 ShortBlok, 32 in 2 different colors
• 2 sides worth of chess pieces in 2 colors
• 2 each of the drawers parts

You can get most of these by printing the plated P930 Chess X….stl files.

Put the slip connectors in the bottom of the chess pieces. Put the drawers together, and then connect them back-to-back using H connectors. Put the half blocks on top alternating colors to make the board. Play chess.

Recommended Printing Tips

While printabloks are design and will print will with any material and most common settings, for best results the following is recommended:

• Layer height 0.16 or lower
• Print connectors in PetG

And that's it. Enjoy.