November 16, 2025
Description
For those of us who don't want to buy new fans for a Dragon Burner but still want the convenience of the zeroclick probe and easy extruder changes.
Based on tn00364361_495827s cowling for the orbiter 2, which was inspired by Oleynick_266380s design of an earlier version. Magnet holder is similar to the one used on the Dragon Burner cowling for microclick.
You will need 3xM3 heat-set inserts (two on the top and one on the back) + 2x(6x3mm) Magnets and wires for contact.
The step file includes 2 bodies and stl gives open geometry warnings since Freecad doesn't seem to like the original step file and says it has an unclosed wire. This does not seem to be tn00364361s fault, since I get the same from from Oleynicks step file.
License:
Creative Commons — Attribution
7
SuPerforator
