Hand with Pinched Fingers Wall Hook (swivel or stationary)

A hand with pinched fingers holding a hook. This model prints in-place.

There are two versions of the model, one that has a swivel hook and one that has a stationary hook. Please double check that you are printing your intended choice.

Overall Size: 72mm x 105mm (2.8" x 4.1")

For added strength add more perimeters when printing. My own tests showed that the swivel hook itself was able to withstand about 4.5kg (10lbs) of weight when printed with 4 perimeters and 80% infill. 

I have not tested how much weight the stationary hook can hold but it should be less because of how it is printed.

If you have issues with the tolerance on the swivel please let me know.

I may upload a version with holes for screws or maybe keyholes in the back for hiding screws. For now, using an adhesive is the best way to mount it.

Updates

2022-06-04: Our family discovered that sometimes the swivel is more annoying than useful so I added a stationary hook version. This will likely not be as strong as the swivel version because of print orientation but is good enough to hold hats and small towels.