Modern Key Hanger

Simple to print key holder that can fit in any household. 

You print the hexagon platform and any number of keychains you need. I personally used glue for sticking it on the wall, however strong double-sided tape should be more than enough to hold it without any problems. As requested, I also added files with holes for screws!

Printing instructions

• Key Hanger - Platform: Print without support, since you do not need much detail in a vertical direction, layer height of 0.24-0.32 is a good trade-off between print speed and the final quality.

• Keychain - Layer height between 0.08 and 0.2. I used 100% infill.

My Twitter :)

In case you have any requests, feel free to send me a message and I will try to help you out!