Linear Rail / Tevo Tornado / Z Axis

This is my version of the Z axis Linear Rail mod for the Tevo Tornado. I've added way more than just the liner rail Z mod but just use what you need.

WARNING: This Z linear rail mount mod will expand your x axis length a few mm and will need adjusting. My X linear rail motor mount is designed to work with this mod. The size and spacing of the mount has been adjusted for the Z rail mod.

The Top Z Motor mount is designed to fit around the LED light mount I have at the top of my printer. The LED mount FILE is Included.

THE REAR BRACING PARTS are for the rear brace incorporated into the top Z mounts. Just two bottom mounts and some M8 nut covers. You need 2x M8x600mm threaded rods for the bracing.

Hardwear:
2x MGN 12H 500mm linear https://www.amazon.com/gp/product/B07VXPTJV2/ref=ppx\_yo\_dt\_b\_asin\_title\_o02\_s00?ie=UTF8&psc=1
10x M3x8mm with T-nuts for the rails
4x 625ZZ bearings 2 for the lead screw top Z mounts and 2 as top spacers below the belt pulleys
2x M3x10mm screws and nuts for the lead rod clamps
2x Anti backlash connectors for the lead screws
2x lead rod screw guides
2x M4x25 for the Z motor mount pulley + 4x 625zz Bearings
(852-2GT-6) Z Axis size Belt
2x GT2 36 Teeth 8mm Bore Timing Belt Pulley for the tops of the lead screws
6x M5x45mm bolts and nuts for the Linear rail mounts/rear z brackets (inner bolts will need to be cut down to size)

Print instructions

Category: 3D Printer Parts