40x11 cooling fan

This is a 40x11 cooling fan, I used a super quit ORION FAN. https://www.amazon.com/dp/B005T7CQHO/?coliid=I33QSUKSRVNLZ&colid=17MXNM0W1L3YJ&psc=1&ref\_=lv\_ov\_lig\_dp\_it

This fan turned out to work better than any other I tried with this mod and is as quiet as a Noctua fan. Break the Orion fan body away from the stator only leaving the back plate of the body attached to the stator. The stator is simply removed from the old fan casing plate with carful prying and twisting. The black tub in the center of the stator can now be glued into the printed fan body. There's just enough tube sticking out of the stator to fit perfectly into the printed fan body with a little super glue.

Print instructions

Category: 3D Printer Accessories