Toilet Mounting Ring Repair Pieces

Toilet Mounting Ring Repair Pieces

I had a toilet mounting stud pull through the retaining ring, so I made this simple piece to reenforce the retaining ring to remount the toilet. It attaches with #16 wood screws into the holes in the original mounting ring. This is for a 150mm circle for the slots and screw holes. If you have the space increase Z height by 50% or so for increased strength.

I also included a version to repair just 1/4 of the ring instead of the whole thing.

Printing:

Use a strong filament (PETG, ABS, ASA, CF versions)

Use enough top and bottom layers to make the whole ring solid, or use very high infill percentage.