IKEA Skadis Filament Spool Holder 20mm Rod

This is large filament spool holder for multiple spools that fits the IKEA Skadis pegboard.

It fits a 20mm wooden rod.

There is space for about 9 filaments per spool holder if you install it like I did.

The wooden rod should be about 70.5mm long, but I suggest measuring it yourself to get a good fit.

Print Settings

This model can be printed with PLA, PETG or anything stronger, like ABS.

• 4 Walls

• 20% Infill

• Supports - YES

Additional Recommendations

I can also recommend adding another Skadis spacer right underneath each of the filament holders, as the weight of the filaments can bend the pegboard a little. These printable spacer almost completely eliminate that bending by supporting the pegboard additionally.