March 21, 2022
Description
I had some real estate left on the Skadis pegboard and 3 spare wireframe skulls by philnelson https://www.thingiverse.com/thing:1388237
Of course i'm going to the mount skulls onto a pegboard!
The adaptor is designed to fit the skull scaled to 150% (roughly 81mm tall)
There are 2 holes for fixing with M4 screws. I used washers on the inside of skull for extra support.
Printed at 0.2mm and 15% infill. No supports required.
License:
Creative Commons — Attribution — Noncommercial
8
EddiePrints
