March 26, 2022
Description
A new addition to my series of MK3S Front Screen clip-on parts.
Just like the others, this nozzle holder clips onto the display support part, through the (parallelogram shaped) centre hole.
With slicing, I orient the nozzle holes to face up, it should appear this way when you add the STL to PrusaSlicer.
Printed at 0.2 with 15% infill.
Supports are required for the clips. I used the support blocker everywhere else.
It's a snug fit but theres a little bit of give on the tongues to let you push it through then lock into place.
I've provided the G-Code and STL files for Left and Right, use whichever suits your environment.
License:
Creative Commons — Attribution — Noncommercial
7
EddiePrints
