Keychron K0 Max Stand

I bought the low profile because it was cheaper but it was weird to put it next to my Keychron K8 Pro because it was too low. So I made this stand.

I recommend printing with TPU for the first layer or 2 and then PETG (because without beam intelocking TPU won't bond with PLA). Make sure that the bottom solid layers are at least 2 (so that TPU would bond to a solid PETG layer, it won't bond strong enough to only infill and the TPU layer would just peal off).

I made sure to include a slot for the USB dongle. I optimized it so it holds well but still easy enough to pull it out (took 4 prototypes for that part alone 😋).

Original model: https://cad.onshape.com/documents/e517b52e0082640a5ce706d4/w/305f50e4265b3456e573b466/e/c7228251aee9b84f44aa3f7a?renderMode=0&uiState=696390e3b6d98a5236db09b5

if you download from OnShape the license is Public Domain but attribution would still be nice 😊