Star Wars Venisa Doza's X-Wing

This is a model of the X-Wing flown by Venisa Doza in Star Wars: Resistance. It has moving print-in-place wings.

This ship is a modified T65 X-Wing. The cannons were replaced with two new cannons for the upper wings and missiles for the lower wings. The engines were also replaced with bigger models. The upper wings have cut-outs and the cockpit window is rounder.

Dimensions

The version with pin is compatible with a small pin and base (link).

Print Instructions

I highly recommend you print the engines separately. If you print them attached to the wings, the nozzles will almost certainly break off.

• For separate engines and no pin, print:

  • venisa doza-no engine.stl

  • venisa doza-engine.stl

• For separate engines and pin, print:

  •  venisa doza-no engine pin.stl

  • venisa doza-engine.stl

  • (version shown in the photos)

• For attached engines and no pin, print:

  • venisa doza-print.stl

• For attached engines and pin, print:

  • venisa doza-pin.stl

Printed at 0.15mm layer height. Requires supports on buildplate.

The part doza-engine.stl was printed at reduced layer height and does not need supports.

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#