Atomos Ninja Flame - SSD Adapter

Model

This is an SSD adapter for the Atomos Ninja Flame, it allows you to use standard 2.5" SSD's. They slide in perfectly and snugly making it much easier to use.

Print Settings

Print this with any sturdy filament, supports are not needed but the filament cannot be too flexible like a TPU as the SSD has to slide into the adapter.

Parts needed

N/A

Installation

(1) Insert the adapter into the SSD slot, you might need to bend it slightly to fit

(2) Insert your standard 2.5" SSD and get shooting!