March 30, 2022
Description
I have a very small workshop, so I have to get creative with my tools. I am using the drill press as a rotary sander and needed a way to quickly attach dust collection. It works perfectly! If you want the same setup, just buy the sanding pad with velcro for a drill and you're good to go.
The adapter for the hose attaches to the drill press shaft, with one M6 hex screw. The design accept an M6 nut and i attached a "hand screw" as well, so you dont need any tools to adjust it.
The opening for the hose is 36mm. If your hose is different, just make a quick adapter.
HW needed:
M6x45 hex screw
M6 nut
License:
Creative Commons — Attribution
8
Johny69
