Revo Connect ~ A modular system for storing Revo nozzles

MODEL DETAILS

Modular, customisable nozzle holders for RapidChange Revo nozzles.
Mounting options for different printers can be found on our Printables profile.

Size Information:
Each Revo Nozzle is engraved with its size. It can be found by removing the sock.

• 0.15 Nozzle = Pink Sock
• 0.25 Nozzle = Yellow sock
• 0.4 Nozzle = Red sock
• 0.6 Nozzle = Blue sock
• 0.8 Nozzle = Green sock
• 1.0 Nozzle = Black sock
• 1.2 Nozzle = Purple sock
• 1.4 Nozzle = Orange sock

RECOMMENDED PRINT SETTINGS

These are the recommended print settings. Tolerances may still work with larger Nozzles/Layer heights but you will lose some of the finer details.

• 0.4 Nozzle or smaller
• 0.2 Layer height or smaller
• No support material is required.
   

DESIGNER

Designed by Will Hardy. 

Check out E3D!