Articulated Skeleton Piranha

ℹ The teeth are a bit sharp, so please be careful! As you’ve probably noticed, the head can be attached, there are two different versions available: a “Hard to press in (Head 2)” and an “Easy to press in (Head 1)” version if you want to print a larger Version of it. Choose whichever you prefer, one clips on more tightly, while the other is easier to attach. Please be cautious when snapping the head on to avoid injury! All of my files include the Head 2 version of the head by default.

ℹ Tips for printing:

• Filament: PLA

• Supports: No!

• Layer height: 0.16(0.15)mm or 0.2mm

• Wall loops: 3

• Infill: 15%

• Seam position: back

• Wall generator: -

• Detect thin walls: -

• Brim: No!

• BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!

• Info‼: Do not scale the Piranha any smaller otherwise the connections will no longer work!

• Info‼: If you apply too much force to the connections they may break because the connections are small!

• Info‼: Please be careful when removing the Piranha from the print bed!

------------------------------------------------------

❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

------------------------------------------------------

Colors and filament I used (1 Color):

• PLA Matte / BoneWhite

Or decide for yourself which colors and how many you want to use!