February 8, 2026
Description
flip phone toy I made for kid.
- buttons can be pressed
- no MMU needed
- everything is printed, ne screws, ... needed
- printed with PLA & 0,4mm nozzle.
Case_lower_top needs support, rest works without
Keypad is designed for Multicolor via material switch at layers.
Use 0.1 mm layerhight for it.
Tip: reduce the print-speed to ~50%. This will result in much better results for the numbers.
The space has to be mounted below the keypad to give the buttons space to move.
License:
Creative Commons — Attribution
Markus
