Arasaka Pendant/Keychain - Cyberpunk 2077

This model prints quickly and is easy to assemble. It's a quick way to use up the last bits of filament on a nearly empty spool. It also makes a great filament swatch. Additionally, this is a good print to show off some more exotic filaments, like silks (for the tree and ring) or carbon fiber (for the body). 

Print Settings

The default settings in PrusaSlicer work perfectly! Just make sure your flow rate and e-steps are correctly dialed in. 

Because this print is mostly horizontal surfaces, consider enabling “ironing” or choosing different “fill patterns” for the top and bottom surfaces (especially for the body). Also, consider using contrasting textures: the body looks awesome with the texture of the black side of a Creality glass bed, while the tree and outer ring look excellent with the smooth glass side.

The tree has two options: one with holes and one without. If you use the tree with holes, you can optionally add jewels into the holes. For the jewels, consider printing 3 at 100% scale and 3 at 98% scale. I highly recommend a brim for the jewels.

Assembly

1. Snap the tree into the body. 
2. Snap the body into the ring.
3. (Optionally) Insert the jewels into the tree's holes.

You may need a mallet, but be sure to tap GENTLY. If you need a mallet, I designed a printable one here: https://www.printables.com/model/85382-mini-mallet 

If light taps aren't working, then you may need to reprint with a reduced flow rate.