December 31, 2019
Description
Two free Butterfly Cookie Cutters, one approximately 60mm 2.5” and 90mm 3.5”.
Printed using PLA I used the following settings;
Draft 0.2mm, Support: Brim (to hold the small base firmly on the bed.)
Cutter One
Size: 67 x 50 x 15 mm,
Cutter Two
Size: 97 x 71 x 15 mm,
To clean the cutters use warm water.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Hex2000
