March 9, 2026
Description
Uses 6x3 magnets to retain the drivers and includes a small bolt organiser in the case lid. Inserts should press fit into the case, but may require a bit of super glue if they are loose, or shrinkage compensation if printed in ABS or similar and fit is too tight. I recommend stronger magnets (N52) for best results, but can get away with weaker ones.
Hardware | Quantity |
|---|---|
6x3mm Magnet (stronger the better) | 4 |
M3x30 BHCS or SHCS | 6 |
Bambu PLA Sparkle - Onyx
Bambu PLA Basic - Turquoise
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Mossi Brossi
