W1219 Thermostat Enclosure with GoPro Mount

This is a very simple yet good looking enclosure for the very cheap and popular W1219 thermostat module. You can use this module for almost everything related to heating or cooling. It is easily programmable and suitable for every DIY needs. For example I use it for electroplating solution heating.

The box and the cover is snap fitting without screws, and after assembly it can be disassembled easily. The module can be secured with 4pcs M6x6 SHCS screws. The box has 4 holes (40x40 mm pattern) on the bottom to allow securing on every surface. I included a GoPro Mount plate also if you use a GoPro mounting system.

On the side there is 5pcs 8mm diameter holes for banana plug sockets or a barrel connector socket. I use one barrel connector socket for powering the unit and 2-2pcs banana plugs for the relay and the sensor input (see my photos). There is an opening on the front for the sensor input also.

Feedback is important!

I spend countless hours perfecting and testing my designs and I would love to hear your feedback too. If you like my designs I appreaciate a like or a comment. Please post a photo if you print this.

Donations

I am open to any kind of donation if you want to support me :)

https://paypal.me/andrasbognar