Heavy Duty Wall Plugs (16mm) | M12-M14 Screws

BOM: Printed with ROSA3D High Speed PLA Gray

Mid-project and realized you're out of large wall plugs? Save yourself a trip to the hardware store! These heavy-duty expansion anchors are designed to hold tight in solid walls.

Designed specifically for a 16mm drill bit and large M12 to M14 screws (or lag bolts).

The set includes 5 lengths:

• 80mm

• 100mm

• 120mm

• 140mm

• 160mm

CRITICAL PRINTING INSTRUCTIONS: To ensure the plug expands correctly and doesn't snap when the screw is inserted, you must print it in the correct orientation:

• Orientation: Print VERTICALLY (standing straight up on the bed).

• Supports: NONE required.

• Bed Adhesion: USE A RAFT. Because these are tall and have a small footprint, a raft is absolutely necessary to prevent them from falling over during printing. (See the included slicer screenshot for an example).