MPCNC PRIMO - Accessories for ALU-Frame 30x30 (drag chain, rail mount, stepper mount, protections etc.)

Similar to the earlier version of MPCNC I have directly modified and optimized a couple of thing at my MPCNC PRIMO.

Especially for a better calibration but also stability I have built the MPCNC on a Alu frame (30 x 30 mm) B-Type Nut 8.

These accessories contain the following parts:

*Frame corner for Alu profil 30x30mm (to be used with the PRIMO corner bottom). The Primo corner bottom can be mounted on top of the frame corner (see images). *XY-Drag-Chain-Mounts for Alu profil 30x30mm. They can be used for drag chain mount for X and Y axis. *X- and Y-brackets for Alu profil 30x30mm. The brakets can be used for drag chain mount for both axis.

• All parts are designed to be fixed/mounted on the frame with T-Slot Nut Sliding Block Slot 8 - Type B - M4, M5 or M6 screws

*Rail-Drag-Chain-Mounts for the pipes the Core is running on to support the drag chain for the Z-axis (with zi ties support) *Motor-Mounts for the stepper motors (X- and Y-axis) with and without drag-chain-mounts (with zi ties support) *Motor-Mount for Z-axis stepper motor with drag-chain-mount (with zi ties support) *Cable-Protection for the pipes (with zi ties support)

The parts are designed for metric screws M4, M5 and M6. The rail mounts are designed for 25mm pipes.

I'll add parts here in case of designing new parts or thinking something is useful.

Some of the parts like the rail-drag-mounts, motor mounts and cable protection you can use also for a "standard" construction of the MPCNC Primo ... but I will publish another accessory set for the standard version, too.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.3

Infill:

Filament: no matter PLA, PETG, ASA, CPE no matter

Notes:

Category: Machine Tools