April 11, 2022
Description
Philips hue bridge got crazy stong LEDs and you should not cover them with tape since they also act as air vents. I therefore designed this cover that make sure no light leak out, but still gives the hue a ≈2mm gap where hot air can leak out and then mix with the atmosphere through 2 small holes in the top and a gap in the back above the Ethernet and power cable. I have used this for a few months and everything seem to work as intended. Use on your own risk.
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.30
Infill:
15%
Filament: Prusa PLA Black
Notes:
Speed setting on prusa 0.6mm nozzle, took 1h to print
License:
Creative Commons — Attribution
EmanuelB
