April 12, 2022
Description
A case I designed for Nuand's bladeRF 2.0 micro. The case has a lip top and bottom to index the case halves together, and the two pieces fasten with 1" long 2-56 screws and captive nuts at bottom.
The non-MMU top has an embossed RF symbol. The MMU version gives pieces to fill in the RF symbol so you can print pretty colors like I did. I still haven't used the micro yet; if it runs hot I'll include another top shell with the RF logo cut all the way through to let heat out.
Enjoy!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
mikeymakesit
