April 27, 2026
Description
If you're a drummer, you know that you are always losing or cracking the feet on the bottom of your drum throne and cymbal stands. This mildly parametric model (you'll have to mess with the model a bit after changing some of the parameters) allows you to replace those feet in TPU. Should slip on pretty firmly, but use a dab of rubber cement or TPU safe glue if you need to.
You can change the width and thickness of the leg, as well as the angle at which it meets the floor. After changing the parameters, there will be some clean up with a few of the other steps that don't scale so perfectly like some of the filets.
Print in TPU, opening side down.
No supports needed, but you may need to use a brim and/or print TPU on masking tape.
License:
Creative Commons — Public Domain
8
3Diocrity
