Cupcake Wrapper - Easter Edition

This cupcake wrapper will bring some extra easter flair to your dining table!

It's a quick and easy print, suitable for MultiMaterial and single extruder printing.
No supports needed.

It's made for printing with a 0.4 mm nozzle at 0.2 mm layer height.

Print it with the colored/structured side facing the buildplate for best results.

I provided the STL files, as well as the 3MF (PrusaSlicer MK3S+ and MK3S+ & MMU2S) and the GCODES for MultiMaterial (MK3S + MMU2S) and single extruder (MK3S+).

There are different STL files for the dots on the easter eggs: One with all dots in one file and 3 files with the dots divided into different colors!
So keep in mind to either upload the “dots_all” OR all 3 color files “dots_red”, “dots_blue” and “dots_yellow”.

 

MultiMaterial Print:

For MMU printing just upload all files (as one) and print the parts in different colors.
If you want to print it on the MMU2 you can simply use the provided GCODE or use the 3MF and change the colors / settings to your liking.

Single Extruder Print:

For Single Extruders you also need to upload all parts as one file, then change the “bottom fill pattern” for each file. (PrusaSlicer: “Editing" -  “Add settings” - “Infill” - "Bottom fill pattern”)

The different patterns will show on the print, so you can see the design even without colors.

To make sure that all files align correctly, I find it easiest to upload it into PrusaSicer for MK3 + MMU2 as “one file” MultiMaterial print and then change the printer into MK3+ (or else) and transfer the settings.

Of course you can simply use the provided 3MF file and change the settings to your liking or just print the provided GCODE for MK3+

When your print is done, just wrap it around a cupcake or muffin and put the little nose into the slot on the other end.
Or assemble it first and put the muffin/cupcake in afterwards.

Here is a little video to see, how it's assembled:

Video

Have fun with this print.

Happy Easter everyone! <3