Star Wars Datacard

Recreation of the Datacard which carried the Death Star Plans in Rogue One.

It is 88mm long, 51mm wide and 4mm thick.

Printed at 0.2mm layer height with ironing enabled. There are four filament changes.

• White, initial color. For the back surface.
• Black, starting at 2.6mm. For the circuitry.
• Gold, starting at 3mm. For the circle/gear in the middle.
• White, starting at 3.4mm. For most of the front surface.
• Black, starting at 3.8mm. For the bar at the bottom.

At 0.2mm layer height every new color will be used for two layers.

All filament changes are present in the presliced files.

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#