May 30, 2026
Description
The square parts were made with TPU and hold the emergency brake cable from rubbing against the cabin floor underneath the car. They snap around the cable.
The other two parts were made with the large base to be mounted against the bottom of the cabin floor and hold the emergency brake cable in the slot to keeping it from touching the muffler.
Both parts do not require any support structure to print. The models are parametric in FreeCAD if different dimensions are needed. These were made for a friend and not tested by me. Use at your own risk.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
Teraflop
