Champion's Spear — Horizon Forbidden West

This is a digital 3D printable model of Aloy's Spear from the videogame Horizon Forbidden West.

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed. All cut parts are placed on the print bed as we would print them to save you time.

You should add feathers and string to the model to finish the look. The long thin parts that go along the middle should have the end piece glued after you put it in place, otherwise, you would be able to get it through the ring that goes around the spear.

SIZE
At 100% scale the model’s dimensions are approximately:
Width 173 mm
Length 1500 mm
Height 105 mm
You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.

3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.2 mm
Infill 15%
Supports 45°
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.

We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.

Printing settings will vary greatly depending on your specific printer.

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links/

Photo of the printed prop by Tiffany Dean Cosplay! Read about the making of the spear here!